JIGUO ZWS-500A Automatic Vertical Slitting Machine Paper Roll Cutting Machine
Introduction
This machine is used for slitting and rewinding various large rolling materials such as paper,cellophane paper,bill paper,double-face adhesive tape,PVC etc.
1. The air-expansion shaft is used for winding, which makes the positioning of the paper tube accurate and easy;
2. The edge blanking system: steel-to-steel edge blanking, independent cylinder adjustment, easy to adjust, so that each layer of paper is not delaminated;
3. Horizontal paper unwinding Rack, pneumatic paper feeding, pneumatic wide belt feeding, each roll of base paper has an independent tension adjustment device;
4. Use front and rear jog switches to pull the base paper, which is easier and safer to operate;
Automatic Slitting Machine Specifications
| Model | ZWS-500A-1100 | ZWS-500A-1300 | ZWS-500A-1500 | ZWS-500A-1700 |
| Max. Speed | 500m/min |
| Slitting Width | 30-1100mm | 30-1300mm | 30-1500mm | 30-1700mm |
| Rewinding Diameter | 600mm |
| Unwinding Diameter | 800mm |
| Slitting Precision | ±0.1mm |
| Loading Weight | 1T |
| Dimension | 4254×2300×1990 | 4454×2300×1990 | 4654×2300×1990 | 4854×2300×1990 |
| Weight | 3.8T | 4T | 4.3T | 4.8T |
| Power | 13KW | 17KW | 20KW | 22KW |
| Power Supply | 380V/50HZ |
| Applicable Materials | PE/PET/BOPP/OPP/PVC/Self-adhesive paper/Kraft paper and other paper products |
Local introduction
| Unwinding Unit 1) The unwinding device adopt hydraulic shelf-less loading 2) Automatic tension brake, when the coil diameter from large to small, it can adjust the tension automatically. | |
| Waste Remove Device(Option) This equipment use suction waste remove device as standard, the winding waste remove device as optional(as shown figure), it is more convenient to clean up the waste, and make the workshop more tidy. | |
| Rewinding Device And Material Connection Aid 1) Rewinding part use slip shaft structure, according to the rewinding situation of different parts, the rewinding pressure can be adjusted. Air-shaft rewinding structure can be chosen as optional. 2) This equipment has material connection aid function, the position of the slitting material can be fixed when re-feeding, it can avoid the falling off and lead to re-feeding, which greatly saves the time of feeding. 3) This equipment with photoelectric position function, there is no need to re-measure the position when changing the paper roll. | |
